Medical ScopeMeter
How to Use the Test Tool
23
Multimeter Measurements (190M-2-III)
The screen displays the numeric readings of the measurements on the meter input.
Meter Connections
Use the two 4-mm safety red (V
eG
) and black (COM) banana jack inputs for the Meter
functions. See
.
Figure 12. Meter Connections
Resistance Value Measurement
To measure a resistance:
1. Connect the red and black test leads from the 4-mm banana jack inputs to the resistor.
2. Press
M
to show the METER key labels.
3. Open the MEASUREMENT menu with
1
.
4. Use cursor to highlight
Ohms
.
5. Press
E
to select Ohms measurement.
The resistor value shows on the display in Ohms. Observe that the bargraph shows as well.
See
.
Figure 13. Resistor Value Readings
CAT III 1000V
CAT IV 600V
CAT II 1000V
