190M Series III
Users Manual
66
Maintenance
This section is about basic maintenance procedures that can be performed by the user. For
complete service, disassembly, repair, and calibration information, see the
190 III Calibration
Manual
www.fluke.com
.
XW
Warning
To prevent possible electrical shock, fire, or personal injury:
•
Have an approved technician repair the product.
•
Use only specified replacement parts.
•
Before carrying out any maintenance, carefully read the safety information at the
beginning of this manual.
•
Remove the input signals before you clean the test tool.
Clean the test tool with a damp cloth and a mild soap. Do not use abrasives, solvents, or alcohol.
These may damage the text on the test tool.
Storage
If you are storing the test tool for an extended period of time, charge the Li-ion (Lithium-ion)
batteries before storing.
Li-ion Battery Pack
Recommendations for safe storage of battery pack:
•
Do not remove a battery pack from its original packaging until required for use.
•
When possible, remove the battery pack from the equipment when not in use.
•
Fully charge the battery pack before storing it for an extended period to avoid a defect.
•
After extended periods of storage, it may be necessary to charge and discharge the battery
pack several times to obtain maximum performance.
•
Keep the battery pack out of the reach of children and animals.
Recommendations for safe use of the battery pack:
•
The battery pack must be charged before use. Use only Fluke approved power adapters to
charge the battery pack. Refer to Users Manual for proper charging instructions.
