Page - 26
4.4
Positioning
There are several possibilities to set the M-SWITCH™ up. Please note that the M-SWITCH™ device does not have
any imposed mounting orientation. The M-SWITCH™ can be used in any spatial configuration.
Vertical position
The M-SWITCH™ can be set up vertically.
As explained in §4.2.3, a pad covers the
bottom face to ensure a good gripping of
the M-SWITCH™ to the surface where it is
placed in vertical position.
Horizontal position
The M-SWITCH™ can also be set up
horizontally. As explained in §4.2.4, several
pads are integrated on each side of the M-
SWITCH™ to ensure a good gripping to the
surface where it is placed in horizontal
position.
Other possible setting-up
The ¼-20’’ insert on the bottom face of the
M-SWITCH™ can be used to mount the M-
SWITCH™ on any frame or support
equipped with ¼-20’’ pins such as a flexible
rod as shown here opposite
(not provided
with the M-SWITCH™).
