Page - 10
3.2.2
2-SWITCH™ Back
Here is a picture of the back of a 2-SWITCH™.
Port #1 is now at the left and port #2 is at the right.
At the centre of the back, a
UNC ¼-20’’ thread is inserted
to enable the user to
fasten the 2-SWITCH™ to the provided base or to any ¼-20’’ screw-mounted
device (as further explained in §3.4).
At the top of the device we can see the RJ45 port to connect electrically the 2-
SWITCH™ to the SWITCHBOARD. Two light indicators are associated with the
RJ45 port.
The
orange indicator
lights up when the 2-SWITCH™ is powered.
The
green indicator
lights up if a “Check connection” identification has
been requested for the 2-SWITCH™ from the SWITCHBOARD (cf. §6.2) or
from the ESS™ Control software (cf. ESS™ Control User Manual).
Warning:
Please note that
only straight-through wired RJ45 cables are
compatible with the ESS™
(to connect the 2-SWITCH™ with the
SWITCHBOARD). Other types of cable can damage the ESS™, and reciprocally,
the cables provided with the ESS™ should not be used for other applications.
FLUIGENT advises to only use the cables provided with the ESS™ for ESS™
operation.
Orange indicator
(Power OK)
Orange ind green indicator
(Power OK + Check connection)
RJ45 Port
Port #1
Port #2
¼-20’’ insert
