Page - 23
Connecting a 1/16’’ OD tubing or plug to the M-SWITCH™
1.
Cut the 1/16’’ OD tubing to the desired length, leaving
a square-cut face. For connecting a plug, take one of
the plugs provided by Fluigent.
2.
Mark each piece of tubing or plug 24mm from the
end
(it will be an indicator to ensure that the tubing
is fully seated).
3.
Loosen the Spanner adequately to release the
ferrules of the integrated fittings.
NB
: it is better to do
the fluidic connections with the M-SWITCH™ in
vertical position (see §4.4).
