Page - 13
Connecting a 1/16’’ OD tubing to the 2-SWITCH™
1.
Cut the 1/16’’ OD tubing to the desired
length, leaving a square-cut face.
2.
Slide the
nut
over the tubing with the nut
thread facing the tubing end being
connected.
3.
Slip the
ferrule
over the tubing, with the
tapered portion of the ferrule facing the
nut. NB: the nuts and ferrules are
specifically designed to work together.
FLUIGENT advises you to only associate the
provided ferrules with the provided nuts
and vice-versa.
4.
Insert the assembly into the receiving port,
and while
holding the tubing firmly
against
the bottom of the port,
tighten the nut
finger tight
.
