HF197AEN_v0501_04
Page 6
Configuration of the unit
The F197-A was designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F197-A according to your specific requirements.
SETUP includes several important features, such as Span, measurement units, signal selection etc.
All setting are stored in EEPROM memory and will not be lost in the event of power failure or a
drained battery.
To extend the battery-life time (option), please make use of the power-management functions as
described in chapter 3.2.3.
Display information
The unit has a large transflective LCD with all kinds of symbols and digits to display measuring units,
status information, trend-indication and key-word messages.
Options
The following options are available: isolated or active 4-20mA / 0-10V / 0-20mA analog output, full
Modbus communication RS232/485 (also battery powered), intrinsic safety, mechanical relay or
active outputs, power- and sensor-supply options, panel-mount, wall-mount and weather-proof
enclosures, flame proof enclosure.
