Fluidwell F197-A Operation Manual Download Page 7 | Manualshive

Page: 7 / 44

Fluidwell F197-A Operation Manual Download Page 7

HF197AEN_v0501_04

Page 7

2. OPERATIONAL

2.1. GENERAL



The F197-A may only be operated by personnel who are authorized and trained by the

operator of the facility. All instructions in this manual are to be observed.



Take careful notice of the " Safety rules, instructions and precautionary measures " in

the front of this manual.

This chapter describes the daily use of the F197-A. This instruction is meant for users / operators.

2.2. CONTROL

PANEL

The following keys are available:

Fig. 2: Control Panel.

Functions of the keys

This key is used to program and save new values or settings.

It is also used to gain access to SETUP-level; please read chapter 3.

This key is used to SELECT the alarm values.
The arrow-key



is used to increase a value after PROG has been pressed

or to configure the unit; please read chapter 3.

The arrow-key



is used to select a digit after PROG has been pressed or to

decrease a value or to configure the unit; please read chapter 3.

«
...
5
6
7
8
9
...
»

Summary of Contents for F197-A













































Reviews:

No comments