Page 21
Translation of the original instructions with assembly instructions AF 113 G3, Filtration Group GmbH, 23.01.18, Mat. No. 70310590, Version 07
7
•
Remove the shaft bearing insert (24).
Fig. 28:
Removing the shaft bearing insert
8
•
Remove the O-ring (70.5) from the shaft bearing insert
(24).
Fig. 29:
Removing the O-ring
9
•
Remove the bearing bushes (50.1) from the shaft bearing
insert.
Fig. 30:
Removing the bearing bushes
10
•
Remove the axial bearing disc (50.2) from the shaft.
Fig. 31:
Removing the axial bearing disc
11
•
Clean all dismantled components.
•
Oil the new sealing elements lightly and install them.
•
Install in reverse order.
After installing:
•
Press the shaft seal attachment and the sealing disc
together and carefully push them over the shaft.
•
Screw in the hexagon screws hand-tight.
•
Turn the shaft slightly and pull it up.
•
Tighten the hexagon screws.
