14
2.8.3.2.
Data Manager
This submenu serves for transferring and deleting of the saved measurements.
Choose submenu with the [
] buttons.
The chosen item is marked with a
*
on the left side of the menu.
Enter the chosen menu item by hitting the [
] button.
Use [
ESC
] to go back to the previous menu. (Display shows:
)
2.8.3.2.1. Transfer Data
Data transfer of the stored measurements by using the RS232 interface or the external
printer. (optional available at Eaton Technologies GmbH)
It is necessary to use a special printer with RS232 interface. .
Choose submenu with the [
] buttons.
The chosen item is marked with a
*
on the left side of the menu.
Confirm by using the [
] button.
Start of the data transfer.
2.8.3.2.1.1.
Data transfer by using the RS232 - interface
After selecting the menu point
„
RS232
“ a
cyclic output
of
all saved measurements
takes place via the RS232 - interface.
Every measurement is being transferred as a separate ASCII
– streak.
Transferring will be performed until the operator ends it by hitting [
ESC
].
