background image

flowserve.com

Flowserve Corporation

5215 North O’Connor Blvd.
Suite 700
Irving, Texas 75039-5421 USA
Telephone: +1-937-890-5839

Flowserve Scienco

3900 Cook Blvd.
Chesapeake, VA 23323-1628 USA
Telephone: +800-343-7867 (343-PUMP)
Fax: +757-673-3528
Website: www.flowserve.com
Email: [email protected]

PUIOM000649-00-UIM (EN) 

August 2022

Flowserve Corporation has established industry leadership in the design and 

manufacture of its products. When properly selected, this Flowserve product is 

designed to perform its intended function safely during its useful life. However, the 

purchaser or user of Flowserve products should be aware that Flowserve 

products might be used in numerous applications under a wide variety of 

industrial service conditions. Although Flowserve can provide general guidelines, 

it cannot provide specific data and warnings for all possible applications. The 

purchaser/user must therefore assume the ultimate responsibility for the proper 

sizing and selection, installation, operation, and maintenance of Flowserve 

products. The purchaser/user should read and understand the Installation 

Instructions included with the product, and train its employees and contractors in 

the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to 

be accurate, they are supplied for informative purposes only and should not be 

considered certified or as a guarantee of satisfactory results by reliance thereon. 

Nothing contained herein is to be construed as a warranty or guarantee, express 

or implied, regarding any matter with respect to this product. Because Flowserve 

is continually improving and upgrading its product design, the specifications, 

dimensions and information contained herein are subject to change without 

notice. Should any question arise concerning these provisions, the purchaser/

user should contact Flowserve Corporation at any one of its worldwide 

operations or offices.
©2022 Flowserve Corporation. All rights reserved. This document contains 

registered and unregistered trademarks of Flowserve Corporation. Other 

company, product, or service names may be trademarks or service marks of their 

respective companies.

Summary of Contents for SEM-100SS























Reviews: