Flowserve.com 10
PUIOM000649-00-UIM (EN/AQ)
August 2022
SEM-100SS User Instructions
4. Installation and operation
4.1 Unpacking the meter
Unpack the meter, and ensure that meter configuration and materials of
construction are correct for your application.
4.2 Installation
Flow can be metered in either direction through the SEM-100SS flow meter.
Thread the meter inlet into the female discharge port of the pump or line.
Using an elbow or coupling, screw the discharge hose onto the other
port of the meter. Use thread sealant tape or pipe dope to seal thread
connections as necessary.
DO NOT over tighten threaded connections. Breakage can
occur resulting in fluid exposure and leakage.
DO NOT mount meter in a load bearing manner. Excessive
loads can cause breakage, resulting in fluid exposure and leakage.
