background image

AKH2 - 

atomac

 ball valve - full port  

 

Ahaus GmbH

von-Braun-Straße 19a

D-48683 Ahaus

Postfach 1162 D-48661 Ahaus

Telefon: +49(0) 2561-686-100

Fax: +49(0) 2561-686-200

Register: 

2

Page: 

 14

Date:

 12.1995

Revision:

 

  

   01.2018

Technical Manual

AKH2 - Actuator Sizing Torques

Packingmaterial:    chevron PTFE or PTFE-graphite

Size

•  for clean and clear application

•  for dry and slurry application

*   reduced port 
-  Stated torques are sizing torques. No further safety factors are to be applied against these torques. 
-   The use of ceramic balls in lined valves will result in 15% higher sizing torques.
-  The use of C-Balls or V-Balls does not result in change in sizing torques. 
-   Stated sizing torques are „Break-Open“ and „Re-Seating“ torques. Running torques are typically 35% below sizing 

torques.

-   The stated „MAST“ value is the Maximum Allowable Stem Torque. Beyond this value permanent deformation / 

destruction of liner is to be expected.

-  Please note the service conditions of the pressure- / vacuum-temperature-diagrams: register 1, page 13.

Size

 0 bar Δ p  

Nm

0 psi Δ p 

in/lbs

 10 bar Δ p  

Nm

150 psi Δ p 

in/lbs

 19 bar Δ p  

Nm

275 psi Δ p 

in/lbs

MAST

 Nm

in/lbs

015

½“

7

62

7

62

8

71

40

354

020

¾“

7

62

7

62

8

71

40

354

025

1“

7

62

8

71

8

71

40

354

032

-

20

177

27

239

34

301

115

1018

040

1½“

20

177

27

239

34

301

115

1018

050

2“

27

239

34

301

45

398

130

1151

065

-

51

451

73

646

93

426

420

3717

080

3“

59

522

85

752

108

956

420

3717

100

4“

79

699

119

1053

158

1398

420

3717

150

6“

210

1859

300

2655

360

3186

1107

9798

200/150*

8“/6“*

210

1859

300

2655

360

3186

1107

9798

200

8“

480

4248

700

6196

900

7966

2180

19295

250

10“

600

5310

1430

12657

1760

15577

8355

73948

300

12“

1150

10178

2400

21242

2900

25667

13250

117272

350

14“

2200

19472

3300

29207

4200

37173

13250

117272

 0 bar Δ p  

Nm

0 psi Δ p 

in/lbs

 10 bar Δ p  

Nm

150 psi Δ p 

in/lbs

 19 bar Δ p  

Nm

275 psi Δ p 

in/lbs

MAST

 Nm

in/lbs

015

½“

9

81

9

81

10

92

40

354

020

¾“

9

81

9

81

10

92

40

354

025

1“

9

81

10

92

10

92

40

354

032

-

26

230

35

311

44

391

115

1018

040

1½“

26

230

35

311

44

391

115

1018

050

2“

35

311

44

391

59

518

130

1151

065

-

66

587

95

840

121

1070

420

3717

080

3“

77

679

111

978

140

1243

420

3717

100

4“

103

909

155

1369

205

1818

420

3717

150

6“

273

2416

390

3452

468

4142

1107

9798

200/150*

8“/6“*

273

2416

390

3452

468

4142

1107

9798

200

8“

624

5523

910

8054

1170

10355

2180

19295

250

10“

780

6904

1859

16454

2288

20251

8355

73948

300

12“

1495

13232

3120

27614

3770

33367

13250

117272

350

14“

2860

25313

4290

37970

5460

48325

13250

117272

Summary of Contents for AKH2
































Reviews: