Flowserve AKH2 Technical Manual Download Page 23

Page: 23 / 31

AKH2 -

atomac

ball valve - full port

Ahaus GmbH

von-Braun-Straße 19a

D-48683 Ahaus

Postfach 1162 D-48661 Ahaus

Telefon: +49(0) 2561-686-100

Fax: +49(0) 2561-686-200

Register:

Page:

Date:

12.1995

Revision:

01.2018

Technical Manual

Optional with pressure compensation grooves

by slotted seat ring

Recleaning

The ball valve should be thouroughly cleaned with a clean, dry, lint-free towel and blown off with

dry nitrogen gas. This will assure that the valve is free from moisture, grease and other media

before packing.

Packing

Prior to packing, the ball valve should be jig welded in a PE-foil (0.2 mm thick). The bag contains

desiccants acc. to DIN 55473, quantity acc. to DIN 55474 and a moisture indicator.

K-K ( 1 / 3 )

Typenschild auf

der Rückseite des Gehäuses

NAME PLATE ON

BODY BACK SIDE

Markierung der Flussrichtung

durch Richtungspfeil

FLOW ARROW FOR

FLOW DIRECTION MARKING

Anstr

UPS

TRE

Abstr

DOW

NSTR

EAM

Handhebel in geöffneter Stellung zur rechten Seite montieren

WRENCH MOUNTING IN OPEN POSITION ON RIGHT SIDE

Sitzring gekerbt, Anstrom - Seite

SLOTTED SEATRING ON UPSTREAM SIDE

Summary of Contents for AKH2
































Search results

Summary of Contents for AKH2

Reviews:

Related manuals for AKH2

Brands by name

Popular brands

Flowserve AKH2, Technical Manual

Search results

Summary of Contents for AKH2

Reviews:

Related manuals for AKH2

Brands by name

Popular brands