09 JUL 08
EchoSwitch II
9 of 33
Rev A
MN300650
Getting Started:
EchoSwitch II can be configured before installation. The switch features non-volatile memory,
so the set points configured before installation will not be lost when the switch is powered down.
To start, all you need is the following information:
•
Basic Tank Information
o
HEIGHT – Distance from the
transducer face to the bottom of the
tank.
o
FILL-H – Maximum fill height of
the liquid from the bottom of the
tank.
•
Set Points:
o
You will need the measured
distance from the bottom of the
tank to each set point. These values
will all be in the same distance
value (inches, centimeters, feet or
meters) and will all be measured
from the bottom of the tank.
•
Power:
o
Provide input power to the
EchoSwitch II.
