09 JUL 08
EchoSwitch II
31 of 33
Rev A
MN300650
Appendix
Setup:
You can view how the EchoSwitch II is configured.
1.
From the main MENU level, press SETUP when HELP appears.
2.
When SETUP appears, press the SELECT key.
3.
Setup will display the following information:
a.
Units, Height, Fill_H, Relay 1, Relay 2, Relay 3
b.
The following will be shown for each relay
i.
Relay Function, On Setting, Off Setting, Safe Setting and Delay
4.
When completed, press SELECT when appears EXIT to return to the main program
level.
Reset:
EchoSwitch II enables the end user to reset specific relays or the entire configuration within the
level controller.
R All
– Resets the entire EchoSwitch II
RST R1
– Resets only the settings associated with Relay 1
RST R2
– Resets only the settings associated with Relay 2
RST R3
– Resets only the settings associated with Relay 3
Follow the instructions below to reset EchoSwitch II
1.
From the main MENU level, press SETUP when HELP appears.
2.
When RESET appears, press the SELECT key.
3.
Select the type of Reset required (Rall, RST 1, RST 2 or RST 3) and press SELECT
4.
When completed, press SELECT when appears EXIT to return to the main program
level.
