DataView™ LI55 Level Controller
Quick Start
30
| P a g e
4. Press
the
Up
button to scroll through the menu options until you
reach Password (PASS 1).
5. Press
the
ENTER
button to enter a password. 000000 will appear.
a. Enter the correct password again using the Right button to
move the highlighted digit to the right and the Up button to
increase the setting’s value.
6. Press
the
ENTER
button to save Password.
a. Unlocked (unLoc) will appear again and the password is
disabled.
If the correct six-digit password is entered, the meter displays the
message
unLoc
(
unlocked
) and the protection is disabled until a new
password is programmed. If the password entered is incorrect, the
meter displays the message
Locd
(Locked) for about two seconds, and
then it returns to Run Mode. To try again, press Enter while the
Locked
message is displayed.
Did you forget the password?
The password may be disabled by entering a master password once. If
you are authorized to make changes, enter the master password
508655
to unlock the meter.
