LIN6606QS_FL_A 02/19
QS302110A
5
|
WARNING!
AVERTISSEMENT!
EXPLOSION HAZARD
– Do not disconnect equipment unless power has
been removed or the area is known to be non-hazardous
RISQUE D’EXPLOSION
– NE PAS BRANCHER NI DÉBRANCHER SOUS
TENSION.
YEAR OF CONSTRUCTION
This information is contained within the serial number with the first four digits representing the year and month
in the YYMM format.
SAFETY INFORMATION
CAUTION
:
Read complete
instructions prior to installation
and operation of the meter.
WARNING
:
Risk of electric
shock or personal injury.
Warning!
Hazardous voltages exist within enclosure. Installation and service should be performed only by
trained service personnel.
Service requiring replacement of internal components must be performed at the factory.
Control room equipment must not use or generate more than 250 VRMS or VDC.
Hazardous location installation instructions for associated apparatus (barrier) must be followed
when installing this equipment.
For safe installation of an ATEX approved transmitter in series with LI24 loop-powered meters, the
hazardous location installation instructions for the transmitter, LI24 loop-powered meter, and
associated apparatus (barrier) must be compatible.
LI24 Series Loop-Powered meters do not add capacitance or inductance to the loop under normal
or fault conditions.
Substitution of components may impair hazardous location safety.
Equipment contains non-metallic materials and therefore special care and consideration should be
made to the performance of these materials with respect to chemicals which may be present in a
hazardous environment.
INSTALLATION
There is no need to remove the meter from its case to complete the installation, wiring, and setup of the meter
for most applications.
Note:
LI24 installation must be performed in accordance with Control Drawing
DW2516 contained within the LIMLI24-2-FL in order to meet agency approval ratings.