Figure 4
360º
Figure 5
In case the actuator will have to be removed, it
is recommended to electrically open the valve
for easier removal. Hereafter reverse the proce-
dure and
turn the snap ring clockwise until the
actuator is loosened and
lift the actuator up.
Again, no need for additional tools.
Do not remove cover from actuator.
Opening cover will void warranty.
Remember to remove the protection film
from the actuator display to avoid conden-
sation.
Orientation
Upside-down installation is allowed along with
the standard horizontal and vertical installation
(figure 5).
This paper is a supplement to the
FlowCon General Instruction
Latest release of any FlowCon material is available on
FlowCon FIT 65-250 mm (2 1/2”-10”)
1B95095 - 02/2020
Page 2 of 10
