65
Problem:
The display shows error code
E2.
Solution:
The memory chip of the computer / display is damaged. Please contact your
dealer
Problem:
The display shows error code
E4
or is not registering the heart rate.
Solution:
- In case your using the hand sensors in the handle bar make sure your hands
are clean and firmly hold the handle bar. Hand creme, movement or even
sweat can disturb the heart rate registration.
- In case your using a chest belt, make sure that:
a) The sensor is moist before applying to the skin.
b) The belt is worn tight enough.
c) The chest belt in not coded.
d) The battery is not empty.
Problem:
The display shows error code
E6.
Solution:
The incline motor is damaged. Please contact your dealer.
Problem:
The display shows error code
E7
Solution:
The incline motor is damaged. Please contact your dealer.
Problem:
The display shows error code
E9
Solution:
The power cable is not properly connected.
- Check the connection between Power plug (11) and the Power wire (12).
- Check if the power cables have been damaged during the assembly of the
treadmill.
In case your problem is not resolved or not described, consult the fitness dealer where you pur-
chased this product.
5. General information
Summary of Contents for RUNNER DTM600
