Florite N920 Series, Instrument Training Manual

Page: 51 / 55

Output Interpolation - Output Program
Function
The purpose of these screens in combination provides for linear interpolation of a physical
measurement in engineering units to be represented by an analog output signal type. The
programmed High/Low Values additionally serve respectively as the highest or lowest analog output
values that are allowed to be output.
Navigation
Access these screens by using the CHAN key until reaching the desired output port number, and then
by using the PROG key until reaching this screen. Note the first numeric field blinks indicating
readiness for programming.
Select
ƒ
Field - select value to change by pressing either the QTY (right) or CHAN (left).
ƒ
Value - change selection by pressing either the ZERO (down) or RATE (up) key.
ƒ
Program - save new selection by pressing the PROG key.