Florite N920 Series, Instrument Training Manual

Page: 50 / 55

PID Response - Output Program
Function
This screen is used to program the factor which determines the bandwidth - time response - applied
to the PID output. The response range is from +0 to -20 dbHz which represents the response
magnitude. Larger negative values represent a lower bandwidth (slower) response. This value is used
to match the controlled plant bandwidth to the control bandwidth.
Navigation
Access this screen by using the CHAN key until reaching the desired port number, and then by using
the PROG key until reaching this screen. Note the character field blinks indicating readiness for
programming.
Select
ƒ
Field - this value has a single field.
ƒ
Value - change by pressing either the ZERO (down) or RATE (up) key.
ƒ
Program - save new value by pressing the PROG key.