Florite N920 Series, Instrument Training Manual

Page: 30 / 55

Rate Filter - Input Program
Function
This screen is used to program the factor which determines the amount of filtering to be applied to the
rate measurement. The filtering range is from +0 to -20 dbHz representing the magnitude of noise
and jitter suppression. Filtering is usually applied to average pulsations and reject transients in the
process being measured. Larger negative values represent increased filtering.
Navigation
Access this screen by using the CHAN key until reaching the desired port number, and then by using
the PROG key until reaching this screen. Note the character field blinks indicating readiness for
programming.
Select
ƒ
Value - change by pressing either the ZERO (down) or RATE (up) key.
ƒ
Program - save new value by pressing the PROG key.