16
IT
MT
a distanza dal corpo. Prima di accen-
derlo, assicurarsi che l‘apparecchio
non sia a contatto con altri oggetti.
1. Accertarsi che la batteria (16) sia
inserita (cfr. „Istruzioni di montag-
gio - Inserimento batteria“).
2. Per l‘accensione azionare con il
pollice il blocco accensione (3)
e premere poi l‘interruttore di
accensione/spegnimento (2). Ri
-
lasciare poi il blocco accensione.
3. Per spegnere, rilasciare
l‘interruttore di accensione/speg-
nimento (2). Non è possibile una
commutazione permanente.
Dopo lo spegnimento
dell‘apparecchio, il gruppo di
taglio continua a girare per un
breve tempo. Attendere che il
il gruppo di taglio sia comple-
tamente fermo. Non toccare
la lama in movimento e non
frenarla. Pericolo di lesioni!
Verifica dello stato di carica
della batteria
L‘indicatore dello stato di carica (
18)
segnala lo stato di carica
della batteria (
16).
Premere il tasto dell’indicazione carica
(
18a) sulla batteria.
Lo stato di carica della batteria viene se-
gnalato mediante l‘accensione della rispet-
tiva spia a LED.
3 LED accesi:
Batteria caricata
2 LED accesi:
Batteria parzialmente caricata
1 LED acceso:
La batteria deve essere caricata
Caricare la batteria (
16) quando
è accesa ormai solo la spia a LED
rossa dello stato di carica (
18).
Impostazioni
sull‘apparecchio
Regolazione dell‘impugnatura sup-
plementare:
È possibile portare l‘impugnatura supple-
mentare in diverse posizioni. Impostare
l‘impugnatura in modo che il disco di
taglio nella posizione di lavoro sia legger-
mente inclinato in avanti.
Allentare la vite per impugnatura (22)
e regolare l‘impugnatura supplemen-
tare (5) nella posizione desiderata.
Stringere nuovamente la vite per im-
pugnatura.
Regolazione dell‘altezza:
il tubo telescopico vi aiuta a regolare
l‘apparecchio in base alla vostra altezza..
Allentare il manicotto filettato
(8). Portare il tubo telesco
-
pico (9) alla lunghezza desiderata
e riavvitare saldamente il manicotto
filettato.
Regolazione dell‘angolo di taglio:
Con l‘angolo di taglio modificato si posso
-
no tagliare anche punti di difficile accesso,
ad es. sotto panchine e sporgenze.
Premere il pulsante (15)
sull‘alloggiamento del motore e in-
clinare il tubo telescopico (9). Sono
possibili 7 posizioni (vedere anche
„Avvertenze per l‘utilizzo“).