15
Congratulations! With your purchase you
have decided on a high-quality product.
Get to know the product before you start to use
it. Carefully read the following instructions for
use. Use the product only as described and only
for the given areas of application.
Keep these instructions safe. When passing the
product on to a third party, always make sure
that the documentation is included.
Scope of delivery
1 x Seat (1)
1 x Left side section (2)
1 x Right side section (3)
2 x Crossbars (4)
2 x Screws (88mm) (5)
10 x Screws (68mm) (6)
2 x Screws (63mm) (7)
4 x Washers (8)
4 x Nuts (9)
16 x Screw head caps (10)
4 x Screw and nut caps M6 (11)
2 x Screw and nut caps M8 (12)
2 x Distance spacers 2.5mm (13)
2 x Distance spacers 9mm (14)
2 x Distance spacers 13mm (15)
1 x Allen key (16)
1 x Screwdriver key (17)
1 x Instructions for use
Technical data
Dimensions: approx. 119 x 96 x 66cm
(W x H x D)
Maximum load: 200kg
Correct use
The article is not designed for commercial use.
The article is designed for use in the living area,
e.g. balcony, terrace, or garden.
Safety notes
Danger to life!
• Never allow children to play with the packa-
ging material unsupervised. There is a risk of
suffocation.
Risk of injury!
• Ensure that correct stability has been achie-
ved before using the article.
• Place the article on a level surface.
• Take particular care of your fingers when
folding and unfolding the article. There is a
risk of injury from trapped fingers.
• Ensure that the folding function is correctly
locked before using the article.
• Ensure that the article has been completely
clamped in place before using the article.
• The article may only be used under adult
supervision and may not be used as a toy.
• Inspect the article for damage or wear before
each use.
• The backrest must not be used as a seat.
• Never stand on the article.
• Do not use the article in the vicinity of an
open fire.
• Secure the article in extreme weather condi-
tions such as strong wind. Store the article in
a protected room.
Assembly instructions
Caution! Assembly must be carried out
by two competent persons!
Step 1 (figure B)
1. Attach the two crossbars (4) to the right side
section (2) using the screws (6).
Note:
Attach the crossbars in such a way that
the rivet heads face forwards.
2. Screw the left side section (3) to the two
crossbars (4) with the two screws (6).
3. Place the screw head caps (10) on the screws
(6).
Step 2 (figure C)
1. Fold the seat part (1) as far as it will go.
2. One person holds the seat between the side
sections (2) (3) and the second person inserts
the connecting rods (1a), which are located
on the sides of the seat, into the mountings
(2a) (3a) on the side sections.
3. Place the security hooks (2b) (3b) over the
connecting rods to secure the seat.
GB
