Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~ 46 ~
a)
Align K2 with K1. The gap between 256
th
nozzle of K1 and 1
st
one of K2
（①
or
③）
must be equal to the gap between two nozzles(
②
).
If
③
>
②
, push print head K2 go upward.(K1 is basic print head, you
mustn’t adjust K2)
If
③
<
②
,pull print head K2 downward.
Note:
Carful and gradual adjustment should be taken in to consideration when doing Y Align.
It will take several prints and adjustments before you are able to get perfect alignments.
b)
Align C, M and Y print heads refer to K print head. The line of C, M or Y should
overlap the K line perfectly.
If K1 print head is above C1, M1 or Y1, pull the C1, M1 or Y1 down.
If K1 print head is below C1, M1 and Y1.push the C1, M1 or Y1 up.
Note:
Fig.5.5.3-5 Adjust Screw
Back setscrew
Front setscrew
Adjusting screw
Note:
Gently lock the
setscrew before align
the print head.
Note:
Clockwise: push up
Anti-Clockwise: pull down
Fig.1.3-6Illustration for Align C, M Y
Fig.5.5.3-7 Illustration for Align C, M Y
Push up
↑
Pull down
↓
Fig.5.5.3-6 Enlarge view of Drawing
