Flora Digital Printing System
Model LJ320P
Copyright 2011@ Shenzhen Runtianzhi Image Technology Co.,Ltd. By Victor Xu
~ 34 ~
Chapter 5 Installation Manual of Flora LJ3208P
5.1 Machine Pre-installation
z
The minimum working area should content the space for the operator to move around the
machine conveniently and safely.
z
Prepare the necessary AC plug on the power cord attached to the machine. Please see the
Technical Specification table for the power requirements.
z
If the PC is not supplied with the machine, customer must meet the minimum PC
specification requirement to be used in this machine
z
Safety signs must be available within the working area.
z
Exhaust System must be provided for the solvent and Ink fumes. Please note that fumes
are heavier than air so it is most likely the concentration happens at the lower level of the
room.
z
Lightings should be sufficient enough.
z
Flammable Storage Cabinet for the Ink and flushing solution stock is highly recommended
to secure them very well.
z
Waste Container should be available for ink and flushing liquid waste as well as ink/solvent
contaminated cloth inside the Printing area.
z
Waste disposal should be in accordance with your local laws governing Hazardous Waste
Disposal.
Once the machine is placed and all spare parts are thoroughly checked, start doing the following
pre-installation activities:
z
Install the drying device.
z
Check the height of the Print head Carriage over the printing platform. The height should be
at least 3mm above the media printing surface.
z
Check the movement of the Print head Carriage for any obstruction by moving it manually
from one end to the opposite end.
z
Install the LCD Panel / Monitor and the PC, keyboard and mouse to be used on this
machine.
z
Place the CPU to the computer compartment provided if applicable.
5.2 Installation of Software
This model supports both Windows 7 and Windows XP. For Windows XP, USB Driver need to be
installed manually. And the account type of computer must be Administrator. And the account must be
active as below:
1)
Right click on Computer Icon, choose “Manager”;
2)
There is coming with
【
Computer Manager Windows
】
as below. Click on “Local User and
Group”, you will find two folders in list;
