Floorpul C150 U13 ERG, Operation And Maintenance

Page: 29 / 112

EN
EN - 9
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Although the lever release
button and brush rotation
levers are pressed at the
same time, the machine
does not start.
The appliance is
unplugged.
Plug the appliance in.
The pad holder does not
rotate.
The brush/pad holder rota-
tion lever is not pressed.
Presence of foreign bodies.
Press the lever.
Remove any foreign bodies
stuck in the appliance.
Polishing liquid is not re-
leased.
The tank is empty.
Button not pressed. Fill the tank.
Press the button.
Insufficient floor polishing. Pad or chemical product
not suitable.
Pad worn.
Use a pad or chemical prod-
uct that is appropriate to the
type of floor to be polished.
Replace the pad.
The machine operates er-
ratically or vibrates heavily.
Check that the pad is
perfectly centred in the pad
holder.
Pad not suited to floor type.
Replace the pad, centring it
correctly in the pad holder.
Use a pad suited to the
floor surface.
The machine turns off unex-
pectedly during operation.
Motor thermal protection
activation.
Restore the reset button
until it "Clicks" and make
sure to work in the correct
range.