![background image](http://html1.mh-extra.com/html/flomec/q9/q9_product-owners-manual_2306722018.webp)
MAINTENANCE
/
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY
/
SPECIFICA
TIONS
GETTING
ST
ARTED
18
17
OPERATION (continued)
USER CONFIGURATION MODE (continued)
If “Y” was selected, the previous PIN will be
shown. The left most digit of PIN is in
focus. Increment the value of each digit as
desired as you advance focus through the
digits.
After reset of the PIN, advance focus to
next menu.
Figure 16
Volume Unit Menu
On this menu the user will be allowed to enter their volume unit of measure from a list
of options. (See Figure 16).
Figure 17
On the volume unit menu (see Figure 18)
the bottom row of characters will be in
focus to indicate they are editable.
Advancing to the next menu with a unit in
focus will select that unit of measure.
Figure 18
Switching between different volume units will not corrupt the Total's contents. For
example, in GAL (gallon) mode, the computer totalizes 10.000 gallons, if the user
switches to L (litre) mode, the display will read 37.854 litres (the same volume,
different unit).
Custom Volume Unit Label Menu
The software also allows the user to create
their own “Custom” volume unit (see Figure
19). Advancing to the next menu with the
“Custom” volume unit in focus will shunt
the user to a new menu (see below) that
will allow the user to create a new label, or
reuse one already stored in computer
memory.
Figure 19
OPERA
TION
Volume
Unit