![background image](http://html1.mh-extra.com/html/flomec/q9/q9_product-owners-manual_2306722012.webp)
MAINTENANCE
/
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY
/
SPECIFICA
TIONS
GETTING
ST
ARTED
12
11
OPERATION (continued)
NORMAL OPERATION MODE (continued)
Total Button: Batch total reset.
When a batch total (see Figure 8-1) is displayed, press and continue to hold
Total
button for 3 seconds; the software will display a three second count down, then reset
the batch total to zero. (See Figures 8-2 thru 8-4)
NOTE: If
Total
button is released prior to count
down completion, the software returns to batch
total screen. (See Figure 8-1)
Figure 8-1
Figure 8-2
NOTE:
After count down completes, display will
show 0.000 until user releases
Total
button.
(See Figure 8-3)
Figure 8-3
NOTE:
After
Total
button is released, the
display will return to Batch Total screen and will
increment the total if flow is detected. (See Figure
8-4)
Figure 8-4
NOTE:
When the accumulative total is displayed in Normal Operation Mode, it cannot
be reset using the
Total
button. Accumulative total
can only be reset by removing the batteries, holding
down the
Total
button, and replacing the batteries. If
the user attempts to reset it using the
Total
button,
the software will display a “Reset Denied” message
on the LCD until the button is released. (See Figure
8-5).
Figure 8-5
OPERA
TION
OPERA
TION