FLIR ThermaCAM P65, User Manual

Page: 131 / 246

Comments Value Label
Move the joystick left/right to enable or disable the
saturation colors.
If On is selected the areas that contain tempera-
tures outside the present level/span settings are
colored with the saturation colors. The saturation
colors contain an ‘overflow’ color and an ‘under-
flow’ color.
There is also a third red saturation color that marks
everything saturated by the detector indicating that
the range should be changed.
■
On
■
Off
Saturation colors
Move the joystick left/right to enable or disable
noise reduction.
When Noise reduction is set to On , the image
noise decreases and the image appears more
stable.
However, when the camera or the object moves,
and
Noise reduction set to On , this may create
some image smearing.
■
On
■
Off
Noise reduction
Press the Adjust region button to display a region
on the screen that will be used when autoadjusting
the camera.
Adjust region
Press the joystick left/right to change the shutter
period, or switch off the shutter.
➲
Please note the following:
■
Although the shutter period works independent-
ly of other functions described in this publica-
tion, FLIR Systems recommends that
Short is
selected when using the camera for detection
of face temperature.
■
Selecting Normal will calibrate the camera at
least every 15th minute, while selecting Short
will calibrate the camera at least every 3rd
minute.
■
If the shutter is switched off, a symbol (*) will
prefix the result at the time a shutter sequence
should have taken place, thus indicating uncer-
tainty in the measurement result.
■
Normal
■
Short
■
Off
Shutter period
10
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
115
10 – Camera program