Action
Step
Point to
Add isotherm
on the
Analysis
menu and press the joystick. An isotherm
will now be added to your image. The isotherm levels will be displayed in the result
table in the top right corner of the screen.
You are now in
edit mode
and can change the isotherm levels by moving the joy-
stick up/down. To leave the edit mode, press the
C
button twice. You can also
leave the edit mode by holding down the joystick for a few seconds, which will
display a shortcut menu.
2
For more information about creating & changing an isotherm, see section 10.2.3.6 –
Add isotherm on page 107.
8.3.6
Resizing a measurement marker
➲
This example procedure, which applies to all types of measurement markers, as-
sumes that you have laid out only one measurement box on the screen and exited
the menu system.
Action
Step
Press the joystick to display the horizontal menu bar.
1
Point to
Edit mode
on the
Analysis
menu and press the joystick. This will display
eight gray handles on the box.
2
Press the joystick once again. This will make a small box in the middle turn yellow.
3
Move the joystick left/right or up/down to select one of the yellow handles.
4
Press the joystick once again. This will make the yellow handle turn blue.
5
To resize the box, move the joystick any direction, then press the joystick again
to confirm the size.
6
Press the
C
button once to leave the edit mode.
7
8.3.7
Moving a measurement marker
➲
This example procedure, which applies to all types of measurement markers, as-
sumes that you have laid out only one measurement box on the screen and exited
the menu system.
Action
Step
Press the joystick to display the horizontal menu bar.
1
Point to
Edit mode
on the
Analysis
menu and press the joystick. This will display
eight gray handles on the box.
2
Press the joystick once again. This will make a small box in the middle turn yellow.
3
Press the joystick once again. This will make the small box turn blue.
4
8
50
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
8 – Tutorials
Summary of Contents for ThermaCAM P65
