Action
Step
Select
Function
by pressing the joystick left/right. This setting defines what mea-
surement function should be used to trigger the alarm.
4
Select
Identity
by pressing the joystick left/right to assign an identity to the function
selected above.
5
Select
Output
by pressing the joystick left/right until
Beep
is highlighted.
6
Specify the
Alarm temp
by pressing the joystick left/right.
➲
Alarm temp
will only be available if
Set from ref temp
has been disabled below.
7
Specify whether the alarm temperature should be set from the reference tempera-
ture or not by pressing the joystick left/right.
8
Specify
Delta alarm
by pressing the joystick left/right.
➲
Delta alarm
will only be available if
Set from ref temp
has been enabled above.
9
8
54
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
8 – Tutorials
