Action
Step
After having carried out the same procedure on the following 9 persons, you can
do one of the following:
■
Actively continue to sample every new person by the F1 or F2 button, and let
the camera update the reference temperature
■
Stop sampling and let the camera trigger an alarm as soon as the alarm condi-
tions are met (> reference tempe delta alarm value)
9
8.4.2
Setting up a silent alarm
Action
Step
Press the joystick to display the menu bar.
1
Point to
Alarm
on the
Setup
menu and press the joystick to display the
Alarm
setup
dialog box.
2
Select
Type
by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
3
Select
Function
by pressing the joystick left/right. This setting defines what mea-
surement function should be used to trigger the alarm.
4
Select
Identity
by pressing the joystick left/right to assign an identity to the function
selected above.
5
Select
Output
by pressing the joystick left/right until
Silent
is highlighted.
6
Specify the
Alarm temp
by pressing the joystick left/right.
➲
Alarm temp
will only be available if
Set from ref temp
has been disabled below.
7
Specify whether the alarm temperature should be set from the reference tempera-
ture or not by pressing the joystick left/right.
8
Specify
Delta alarm
by pressing the joystick left/right.
➲
Delta alarm
will only be available if
Set from ref temp
has been enabled above.
9
8.4.3
Setting up an audible alarm
Action
Step
Press the joystick to display the menu bar.
1
Point to
Alarm
on the
Setup
menu and press the joystick to display the
Alarm
setup
dialog box.
2
Select
Type
by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
3
8
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
53
8 – Tutorials
