10588303;a2
Figure 10.20
Spot
dialog box
Figure 10.21 Explanations of the
Spot
dialog box
Comments
Value
Label
Select
On
to set the emissivity, the reflected tem-
perature, and the distance for this spot only.
Selecting
On
will also assign an asterisk to the
measurement marker’s label.
■
On
■
Off
Local
You can set the
Emissivity
if
Local
is enabled. If
not, this option will be shaded.
➲
If you enter an emissivity value less than 0.30
the emissivity box will begin flashing to remind you
that this value is unusually low.
User-defined
(0.01–1.00)
Emissivity
Press
Emissivity table
to display an emissivity ta-
ble on the screen.
You can use this emissivity table to find emissivities
for a number of different materials. An emissivity
table can be created and edited in FLIR Systems’s
PC software.
➲
The emissivity file can be stored at root level or
at directory level. However, the camera software
prioritizes files that are stored at directory level and
the directory has to be selected in order to store
the emissivity file in the camera memory. If the
camera software does not find an emissivity file at
directory level, it searches for similar files at root
level and saves those instead.
User-defined
Emissivity table
You can set
T Reflected
if
Local
is enabled. If not,
this option will be shaded.
User-defined
T Reflected
You can set
Distance
if
Local
is enabled. If not,
this option will be shaded.
User-defined
Distance
Select
On
to assign a label to the measurement
marker (a small box with a number).
■
On
■
Off
Label
10
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
99
10 – Camera program
