FLIR Raymarine HD DIGITAL RADOME, Installation Instructions Manual

Page: 54 / 64

13.1 Troubleshooting
The troubleshooting information provides possible causes and corrective action required for common
problems associated with installation and operation of your product.
Before packing and shipping, all Raymarine products are subjected to comprehensive testing and
quality assurance programs. If you do experience problems with your product this section will help
you to diagnose and correct problems in order to restore normal operation.
If after referring to this section you are still having problems with your product, please refer to the
Technical support section of this manual for useful links and Raymarine Product Support contact
details.
Troubleshooting procedure
Use the following table to identify problems and remedial actions.
Symptom Action
No Data Source or No Scanner message
on display.
Ensure the digital cable is securely connected at both
ends and is in good condition.
Ensure power supply thermal breaker has not tripped
or fuse has not blown. If necessary, reset breaker or
replace fuse ONCE ONLY. If breaker keeps tripping
or fuse keeps blowing, contact Raymarine technical
support for assistance.
Ensure power supply maintains the correct voltage
when the system is switched on.
Ensure all products in the system have the correct
software. Contact Raymarine technical support for
assistance.
If the HD Digital Radome Antenna is connected to the
multi-function display (MFD) via a SeaTalk
hs switch,
ensure that:
• All relevant equipment is correctly connected to
the SeaTalk hs switch.
• The SeaTalk hs switch power supply is satisfactory.
• The SeaTalk hs switch is in good condition.
• SeaTalk hs cables are securely connected and in
good condition.
Displayed bearing is different to the true
bearing. Carry out the bearing alignment procedure described
in the installation guide for the relevant MFD.
54