FLIR Raymarine CAM220IP, Installation Instructions Manual

Page: 46 / 54

10.1 Technical specification
Physical specification
Dimensions • Base diameter : 99.2 mm
(3.9 in)
• Overall Height : 80.7 mm
(3.2 in)
Weight • Boxed : 0.65 kg (1.4 lbs)
• Unboxed : 0.55 kg (1.2
lbs)
Power specification
Nominal supply voltage 12 V dc
Operating voltage range 10.8 V to 13.2 V dc
Power consumption 5.4 W Maximum (IR LEDs
On)
Current 1.5 A
Power over Ethernet PoE Class 2 (6.49 W Max)
device (802.3af)
Environmental specification
Operating temperature –10°C to 50°C (14°F to
122°F)
Storage temperature –20°C to 60°C (–4°F to
140°F)
Relative humidity 95%
Weatherproof rating IPX6 & IPX7
Camera specification
Sensor / DSP 2.0 Mega pixel 1/2.8” Sony
CMOS image sensor
Scanning system Progressive scan
Day / Night True Day / Night with ICR
filter changer
Total pixels 1952(H) x 1116(V) 2.18 Mega
pixel
Effect pixels 1944(H) x 1104(V) 2.14 Mega
pixel
Minimum illumination 0 Lux (IR LEDs On)
I 2 Distance 20 m (65.6 ft.) (4 LEDs)
Lens 3.6 mm Mega pixel board
lens
Video specification
Compression H.264 High Profile @ level
4.0, Motion JPEG
Resolutions 1280 x 720 default
(supporting up to 1920 x
1080 (FHD)
Video streaming Supports multi streaming with
H.264, MJPEG
Frame Rate • H.264: 30fps @ 1920 x
1080p
• MJPEG: 30fps @ VGA
resolution
Bit Rate Control • Dual stream: H.264,
MJPEG
• H.264: CBR / CVBR
Conformance specification
Conformance • EN 60945:2002
• EMC Directive
2004/108/EC
• Australia and New
Zealand: C-Tick,
Compliance Level 2
46 CAM220IP