1
427-0033-00-12 Version 110
February 2019
5
This document does not contain any export-controlled information.
F
-
Series ID Camera Installation
This manual describes the installation and initial configuration of the F
-
Series ID thermal camera. The
F
-
Series ID camera has software providing for on-board video analytics: setting of detection regions,
trip lines, and classification of detected objects. Refer to
1.1
Camera Overview
The F
-
Series ID cameras are components within the FLIR Thermal Fence. The video from the camera
can be viewed over a traditional analog video network or it can be viewed by streaming it over an IP
network using M-JPEG and H.264 encoding. The Ethernet connection also provides for camera
configuration and control using either a web browser or a video management system (VMS) such as
FLIR Latitude
TM
.
The FLIR Thermal Fence combines FLIR thermal security cameras and the FLIR Latitude control and
management software in a fully integrated perimeter security solution. The FLIR Thermal Fence
provides automated perimeter surveillance, intrusion detection, and alert capabilities for perimeter
security applications including critical infrastructure, petrochemical facilities, nuclear facilities,
commercial campuses, and residential neighborhoods. The FLIR Thermal Fence gives you instant,
automated threat detection and visual threat assessment capability around the clock in one easy-to-
use package.
If help is needed during the installation process, contact the local FLIR service representative or
contact support at:
https://www.flir.com/support-center/support-hq/
. All installers and integrators are
encouraged to take advantage of the training offered by FLIR; visit
https://www.flir.com/support-center/training/
for more information.
1.2
Warnings and Cautions
For safety, and to achieve the highest levels of performance from the F
-
Series ID camera system,
always follow the warnings and cautions in this manual when handling and operating the camera.
Warning!
Caution!
If mounting the F
-
Series ID camera on a pole, tower or any elevated location, use industry standard
safe practices to avoid injuries.
Except as described in this manual, do not open the F
-
Series ID camera for any reason.
Disassembly of the camera can cause permanent damage and will void the warranty.
Be careful not to leave fingerprints on the F
-
Series ID camera’s infrared optics.
The F
-
Series ID camera requires a power supply of 24 V. Operating the camera outside the specified
input voltage range or the specified operating temperature range can cause permanent damage.
