FLIR DM91 USER MANUAL Document Identifier: DM91-en-US_AB
20
5.8 Capacitance Measurements
Warning
: Do not perform capacitance tests before removing the power to the capacitor
or other devices under test during a measurement. Injury to persons can occur.
1.
Set the function switch to the
position.
2.
Use the
button to select the capacitance measurement. The F (Farad) unit
of measure appears.
3.
Insert the black probe lead into the negative COM terminal and the red probe
lead into the positive terminal.
4.
Touch the tips of the probe across the part under test.
5.
Read the capacitance value on the display.
Note
: For very large capacitance values, it may take several minutes for the
measurement to settle and the final reading to stabilize.
Fig. 5-5
Capacitance Measurements
