March 10, 2019
12
Installing and Connecting the Camera
CM-3304/CM-3308 User and Installation Guide
4
Installing and Connecting the Camera
This section describes how to install and connect the unit. It includes the following topics:
·
·
Outdoor Mounting Recommendations
·
·
·
Connecting the Camera to the Network
·
4.1
Pre-Installation Checklist
Before installing the unit, make sure that:
·
Instructions in the
·
All related equipment is powered off during the installation.
·
Use best security practices to design and maintain secured camera access, communications
infrastructure, tamper-proof outdoor boxes, etc.
·
All electrical work must be performed in accordance with local regulatory requirements.
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient
temperature regulation to support the unit’s requirements (cooling/heating). Operating
temperature should be kept in the range -40° to 50°C (-40° to 122°F), with no more than
90% non-condensing humidity.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous
que la régulation de température est suffisante pour répondre aux exigences de l'unité
(refroidissement/chauffage). La température de fonctionnement doit être maintenue
dans la plage (-40° à 50°C/-40° à 122°F), sans condensation d'humidité supérieur à
90%.
4.2
Outdoor Mounting Recommendations
Following are additional considerations for outdoor installation:
·
For outside wiring installation, always use weatherproof equipment, such as boxes, receptacles,
connectors, etc.
·
For electrical wiring, use the properly rated sheathed cables for conditions to which the cable will
be exposed (for example, moisture, heat, UV, physical requirements, etc.).
