Doc No.
0096489
Page
5
of
29
V1.2 Issued 17 Aug 2020
If the magnetic base is not directly attached, due to a non-metallic surface (or space
constraints), the base can be suitably fastened to any structure using brackets, plates or other
type of support.
_________________________________________________________________
IMPORTANT
In order to achieve the best performance the antenna attached to the top
right corner of the base unit must be
perpendicular/horizontal to the antenna polished rod as
shown in the above images.
_________________________________________________________________
You many optionally use an extension cable to mount the antenna. Make sure the RF filter is
connected directly to the base unit.
DIN rail mount
Pole mount with U-Bracket