CCWR - User Manual
Doc No.
0096489
Page
14
of
29
V1.2 Issued 17 Aug 2020
4.
Equipment Maintenance
The only live maintenance permitted for this product is replacement of the battery pack which
must be done in non-hazardous areas.
Health and safety standards in the workplace must be strictly observed for all personnel
conducting maintenance tasks.
This manual must be read and carefully kept. The manual should be referenced before conducting
any fitment or maintenance tasks.
Battery Replacement
CCWR remote unit (transmitter) is powered from a specific battery.
•
TADIRAN – TL-5930/F
WARNING
– Do not replace battery when an explosive atmosphere is present
Procedure
1.
Open the battery compartment by loosening the battery doorknob.
2.
Unplug the battery connector from housing by releasing the locking tab and pulling the
connectors apart.
3.
Remove the battery (dispose of battery in accordance with the manufacturer’s instructions).
4.
Insert a fresh battery and connect to the remove unit by mating the connectors.
5.
Route the excess cable (inside the battery compartment) as to not cause any signs of cable
pinching or compression.
6.
Close the door and lock with the doorknob. Ensure the sealing gasket is properly seated in
the locating groove.
IMPORTANT
Please refer to battery manufacturer, TADIRAN’s guidelines (LTN0111) for disposal of Lithium
batteries.
