11
(3) NVR with PoE port
４
-
３
IP Camera Registration & PoE port connection
4-3-1 Non PoE model
①
Check the adapter, and connect the power.
②
Once Power cable is connected (found in Rear Side), booting will be enabled.
③
After booting is finished,
the NVR can search for IP Cameras within the same ‘network’.
④
IP Camera Registration Menu window pops up as shown below.
•
After an IP Camera is found, the IP Cameras “Port, ID, password, protocol” can be inputted.
Please take careful note that if there is any mistake or ‘typo’ in any of the 4 Settings (Port, ID,
PW, Protocol), then connection will not be possible.
•
Have to press the Save button after registration.
○
5
After IP camera registration, the live screen and channel indication,/ clock are shown.
○
6
Menu window pops up by clicking the right button of the mouse as shown below
