Flexit Roomie Dual, Assembly And Operation Instructions Manual

Page: 14 / 28

14
R O O M I E D U A L
6. Connection to power mains and control
!
Disconnect the unit from power supply
prior to any electric installation ope-
rations.
!
The rated electrical parameters are
stated on the rating plate. Any tampe-
ring with the enternal connections is
prohibited and will void the warranty.
Changing the cable inlet.
It is possible to change the cable inlet from underneath the
unit to the back. Any connections in the terminal according
to the wiring diagram.
Cable clamp Cable clamp
The unit is rated for connection to single-phase AC 100-240
V/ 50-60 Hz power mains.
The units shall be installed according to current laws and
regulations.
Signal cables shall be shielded and with a minimum cross
section of 0.25 mm
2 .
Connect the units to power mains in compliance with the
wiring diagram, page 15.
!
The following installation shall only be
performed by a professional electrici-
an according the instruction in the
user manual.