12
R O O M I E D U A L
6.
Insert the cartridge into the air duct as figured below.
Be sure the pointer is directed upwards. Then fix the wire
5.
Fix the back part of the indoor unit on the wall with the
screws supplied with the mounting kit of the ventilator.
Insert the wires under the cable
clamp and connect the socket
connector to the circuit board.
The mark must be
directed upwards.
Remove the two retaining screws from the left transpar-
ent cover to enable access to the terminals.
with the protruding clamp and connect the socket con-
nector to the circuit board.
Summary of Contents for Roomie Dual
Page 2: ...2 R O O M I E D U A L...
Page 26: ...26 R O O M I E D U A L...
Page 27: ...27 R O O M I E D U A L...
Page 28: ...Flexit AS Televeien 15 N 1870 rje www exit no...
