M
aintenance Guide – Econordic heat pump
45
8.2 SYSTEM PCB REASSEMBLY
STEP 5:
Remove the two screws (M4x8) in the upper
right corner and in the bottom left corner.
IMPORTANT:
Hold on to the System PCB when
you remove the last screw,
otherwise the PCB may fall down.
STEP 6:
Remove the SYSTEM PCB.
To remove the
SYSTEM PCB pull
slightly on the right
side first.
To install the SYSTEM
PCB, insert slightly the
left side first. Use the
pins to center the
PCB.
STEP 1:
Place the SYSTEM PCB in the right
position.
