M
aintenance Guide – Econordic heat pump
37
6.5 REASSEMBLY OF THE FAN HOUSING
STEP 4:
Fasten the four screws (M4 x 16) on the fan
bracket.
To fasten the four screws (M4 x
16), use a Torx T20 tip. The fan
bracket can be sharp. It’s
recommended
to use
protective gloves.
STEP 1:
Reinsert the fan housing in its location,
shown in the 3D view hereafter.
To reinsert the fan housing, insert
the upper side first, as shown in
picture(1). Push the lower part
into the right position(2). Finally,
push the left side into its housing
(3).
IMPORTANT:
Check the fan rotation after installation.
1
2
3
