M
aintenance Guide – Econordic heat pump
28
5.4 REAR PANEL
5.4.1 REAR PANEL DISASSEMBLY
Comment:
The rear panel will only be changed in case of damages during handling at the
factory. At this step, there are no metal casing assembled on the heat pump.
STEP 1:
Remove the front panel (§ 5.1.1).
STEP 2:
Remove the top panel (§ 5.3.1).
STEP 3 :
Pull the rear panel slightly by the two
upper corners.
Avoid too angle the rear
panel to much since there is
a risk of breaking the lower
part.
STEP 2 :
Turn the duct fittings 90° clockwise to lock
them.
IMPORTANT :
Do not use force during the
assembly and stop when you
notice resistance.
To remove the duct fitting, just unscrew it.