M
aintenance Guide – Econordic heat pump
30
5.5 LEFT PANEL
5.5.1 LEFT PANEL DISASSEMBLY
STEP 3 :
Press strongly on the left and rear
panel at the same time to avoid a
gap between the parts.
Make sure there is no
gap remaining between
the parts.
Comment:
Rear panel will only be changed in case of damages during handling at the
factory. At this step, there are no metal casing assembled on the heat pump.
STEP 1:
Remove the front panel (§ 5.1.1).
STEP 2:
Remove the top panel (§ 5.3.1).
STEP 3:
Remove the left panel by pulling slightly
on the left side to disassemble the
exhaust air duct. Then, pull gently at the
left panel upper side.
LEFT PANEL VIEW
