10 Measurement
10.3 Measurement settings
PIOX S72*
2022-05-15, UMPIOX_S72xV1-9EN
114
Output function test
The function of the output can now be tested.
• Connect an external measuring instrument to the terminals of the output.
• Select
Yes
to test the output. Select
No
to display the next menu item.
• Press ENTER.
• Enter a test value. It has to be within the output range.
• Press ENTER.
If the external measuring instrument displays the entered value, the output functions correctly.
• Select
Repeat
to repeat the test,
Finish
to display the next menu item.
• Press ENTER.
• Select
Yes
to test the assignment of the measured value to the output signal. Select
No
to display the next menu item.
• Press ENTER.
• Select in the scroll list
Active
or
Passive
.
• Press ENTER.
If the external measuring instrument displays the value (min. output value for
Passive
, max. output for
Active
), the
output functions correctly.
• Select
Repeat
to repeat the test. Select
Finish
to display the next menu item.
• Press ENTER.
10.3.6.2 Output of a status/event value
• Select the list item
Options\Channel A\Outputs\...\Status
.
• Press ENTER.
Output range
• Select a list item.
– 4...20 mA
– Other range
• Press ENTER.
If
Other range
is selected, enter the values
Output
MIN
and
Output MAX
.
The output range has to be > 10 % of the max. output value (
Output MAX
). If the output range is smaller, an error
message will be displayed. The next possible value will be displayed.
Options\Channel A\Outputs\...\Test signal
Options\Channel A\Outputs\...\Enter test value
Options\Channel A\Outputs\...\Test mea. range
Options\Channel A\Outputs\...\Enter test value
Source item
Status
Output range
Status OK
Idle state
Output info
Test signal
Test mea. range
see annex A
Options\Channel A\Outputs\...\
Output range
